How to Change your Kyocera MFP’s Default Scan Resolution from the Web Interface

Estimated reading time: < 1 min

1. Type your machine’s IP address into the URL bar of a web-browser

(If you do not know your machine’s IP address, see our guide here: How to find your IP address)

Enter your IP Address

2. You will receive a certificate error. Press ‘Show Advanced’ and then ‘*Proceed to *Your IP address*’

(This example is from Google Chrome. If using another web browser, your certificate error will look slightly different. Just make sure to proceed to the site.)

Your connection is not private IP Warning

3. Login with your credentials

(The picture below is just an example. For administrator credentials, please reach out to your IT administrator or your Kyocera Service Provider)

Kyocera administrator credentials
Kyocera Admin Login

4. Highlight ‘Function Settings’ and click on ‘Common/Job Defaults’

Function Settings Default Edited

5. Press the drop down menu next to ‘Scan Resolution’ and select the desired size

Function Settings

6. Scroll to the bottom of the page and press ‘Submit’

bottom of the page and press ‘Submit

You’re done!

Tags:
Previous: How to Change your Kyocera MFP’s Default Scan Resolution from the Control Panel
Next: Installing FM Web Audit onto Windows from the Installer Email