---
title: Registering a Device with Kyocera Fleet Services at the MFP Control Panel
description: This tutorial shows you how to register a device with Kyocera Fleet Services using the MFP Control Panel. Kyocera Fleet Services setup.
url: "https://bdsdoc.com/kb-articles/registering-a-device-with-kyocera-fleet-services-at-the-mfp-control-panel/"
updated: "2024-10-25"
category: Kyocera Fleet Services
tags:
  - Control Panel
  - KFS
---

# Registering a Device with Kyocera Fleet Services at the MFP Control Panel

Here is a video from Sam showing two different ways to register your device with Kyocera Fleet Services. We will go over specifically how to register from the MFP’s control panel

[Kyocera Fleet Services](https://www.youtube.com/embed/t7LuVOauU8A)

## 1. Press the ‘System Menu’ button

![Select the Function - System Menu - kyocera fleet services](https://bdsdoc.com/wp-content/uploads/2020/08/Main-menu-Edited.png)

## 2. Press the ‘Down Arrow’

![Press the down arrow on the Control Panel interface - kyocera fleet services](https://bdsdoc.com/wp-content/uploads/2022/01/Control-panel-page-2.png)

## 3. Press the ‘System/Network’ button

![System/Network button in the control panel](https://bdsdoc.com/wp-content/uploads/2022/01/Control-Panel-System-and-network.png)

## 4. Login with credentials

(The following is just an example. For administrator credentials, please reach out to your IT administrator or your Kyocera Service Provider)

![Login with your credentials](https://bdsdoc.com/wp-content/uploads/2022/01/Login-edited.png)

## 5. Press the ‘Down Arrow’

![Kyocera Fleet services System/Network](https://bdsdoc.com/wp-content/uploads/2022/01/Control-Panel-system-page-2.png)

## 6. Press the ‘Remote Services’ button and set it to ‘On’. Press ‘OK’

 ![Control Panel Remote Settings](https://bdsdoc.com/wp-content/uploads/2022/01/Control-Panel-Remote-Services-Settings-1.png)  ![Control Panel Remote Settings On](https://bdsdoc.com/wp-content/uploads/2022/01/Control-panel-remote-services-settings-on-1.png)

## 7. Press the ‘Server Settings’ button

![Press the Server Settings Button](https://bdsdoc.com/wp-content/uploads/2020/09/Control-Panel-remote-services-settings-server-settings.png)

## 8. Enter your Access Code by pressing the ‘Access Code’ button. Press ‘Register’

(Make sure that your URL matches the one in the **[picture](https://bdsdoc.com/kb-articles/how-to-create-a-network-shared-folder/)**. The Access Code is case-sensitive.)

![Access Code by pressing the ‘Access Code’ button](https://bdsdoc.com/wp-content/uploads/2020/09/Control-Panel-Server-Settings-1.png)

![Control Panel Success](https://bdsdoc.com/wp-content/uploads/2020/09/Control-panel-Success.jpg)

Upon completion you will see the second screen. It should say “Registered Group Name: \**Your Group Name*\*”. You’re done!